Eurocode 2 Second Generation resources
To assist with the transition from the first to the second generation of the Eurocodes, The Concrete Centre has developed two types of guidance; ‘How to’ guides and corresponding ‘Worked Examples’. ‘How to’ guides set out the process for common design tasks, including developing design criteria, designing elements and preparing reinforcement details. The guides include flowcharts to outline the processes and commentary, design aids and tabulated data to assist with completing the design tasks. References are made to relevant clauses within standards to enable users to cross-reference between the guides and standards, and to assist with designs that are outside of the scope of the ‘How to’ guides.
‘Worked Examples’ are step-by-step calculations showing how to put the processes described in the ‘How to’ guide into practice. They are based on typical design parameters and aim to show in detail how designs may be carried out. They provide references to both relevant ‘How to’ guide content and to clauses, figures and tables within the codes, to enable designers to use them as a template when carrying out their own design calculations.
Links to currently-available second generation Eurocode 2 guides are below, with more in the series to be added.
 |
How To: G0. Introduction to the second generation of Eurocode 2
This guide explains the background to the second generation of Eurocode 2, which comprises BS EN 1992-1-1:2023 and BS EN 1992-1- 2:2023. It highlights key changes in structure and content when comparing the second generation to the first generation. It also outlines the ‘How to’ guides and corresponding ‘Worked examples’ which are being developed by The Concrete Centre to support designers in transitioning to the second generation of the Eurocodes.

|
 |
How To: G1. Design Criteria
This guide explains how to collate all the design criteria required to undertake the design of concrete elements using BS EN 1992-1-1:2023, referred to as Eurocode 2 in this guide, and BS EN 1992-1-2:2023; these form part of the second generation of Eurocodes. It also highlights some important content of EN 1990-1:2023+A1:2026, referred to as Eurocode in this guide, which is relevant to the design of concrete structures.

|
 |
How To: G2. Actions
This guide explains how to determine the design actions on a structure or element, including foundations and retaining structures. It does not consider the effects of fatigue or structural failure due to vibration (e.g. grandstands) neither does it explain the requirements for temporary works.

|
 |
How To: H1. Solid slabs
This guide covers the analysis and design of solid concrete slabs using BS EN 1992-1-1:2023, referred to as Eurocode 2 in this guide, which is part of the second generation of Eurocodes. It sets out a design process and gives useful commentary on the provisions within Eurocode 2. It also provides derived equations and design aids to assist in the application of the rules. This guide covers one-way and two-way solid slabs which are typically supported by beams and walls.

|
 |
How To: H3. Beams
This guide covers the analysis and design of concrete beams using BS EN 1992-1-1:2023, referred to as Eurocode 2 in this guide, which is part of the second generation of Eurocodes. It sets out a design process and gives useful commentary on the provisions within Eurocode 2. It also provides derived equations and design aids to assist in the application of the rules.

|