No-fines concrete is obtained by eliminating the fine material sand, from the normal concrete mix. The single-sized coarse aggregates are surrounded and held together by a thin layer of cement paste giving strength of concrete.
The advantages of this type of concrete are:
- Lower density.
- Lower cost due to lower cement content.
- Lower thermal conductivity relatively low drying shrinkage.
- No segregation and capillary movement of water.
- Better insulating characteristics than conventional concrete because of the presence of large voids.
No-fines concrete is not suitable for use in reinforced concrete.
This document provides information on the material and resource efficiency of concrete and masonry.
Gives likely structural options for a concrete frame, with useful points to note - written by engineers for engineers.
This publication seeks to provide information for structural engineers who are designing tall buildings in concrete.
An all-you-need-to-know guide on the specification of sustainable concrete.
Concrete's ability to provide passive cooling is widely applied in both new and refurbished buildings; this guide explains thermal mass and its advantages.
A magazine to celebrate 10 years of the concrete industry sustainable construction strategy.
The buildings from 70 years of Concrete Quarterly.
This guide sets out how concrete's attributes can be used to minimise CO2 emissions.
£55.00 + VAT
This publication assists engineers in understanding the common challenges of building tall.
This publication widens the understanding of post-tensioned floor construction and illustrates the considerable benefits.