High workability concrete
The workability of fresh concrete should be suitable for each specific application to ensure that the operations of handling, placing and compaction can be undertaken efficiently.
BS EN 206 and BS8500 the European and UK standards for concrete give guidance on workability for different uses. The handling and placing properties of concrete mixes can be improved considerably by the use of cement replacement materials such as fly ash. Furthermore, the use of admixtures such as water reducers and superplasticisers has beneficial effects on workability without compromising other concrete properties.
On site productivity can be greatly increased by utilising highly workable concretes. They are especially suitable in the following applications:
- Inaccessible locations
- Large flat areas
- Underwater applications
- Pumping concrete over long distances.
This guide sets out how concrete's attributes can be used to minimise CO2 emissions.
This document provides information on the material and resource efficiency of concrete and masonry.
This guide focuses on the use of concrete at Coin Street Neighbourhood Centre and its part in creating a low energy building.
A magazine to celebrate 10 years of the concrete industry sustainable construction strategy.
This guide aims to enable designers to realise their aesthetic aspirations using concrete.
Gives likely structural options for a concrete frame, with useful points to note - written by engineers for engineers.
£30.00 + VAT
This publication summarises the material used in the design of reinforced and prestressed concrete bridges using Eurocode 2
The buildings from 70 years of Concrete Quarterly.
This publication widens the understanding of post-tensioned floor construction and illustrates the considerable benefits.
This guide focuses on concrete and masonry housing, and presents requirements for Part L1A of the Building Regulations.