Structural fire design
A guide to selecting the appropriate method for the design of elements in the fire condition is given in Figure 1 below.
A chapter covering the structural fire design of concrete structures to Eurocode 2, Part 1-2: structural fire design is available in the publication How to Design Concrete Structures to Eurocode 2.
Figure 1: Flow chart showing which fire resistance design method to adopt
Extract from 'How to Design for Concrete Structures using Eurocode 2' (Page 99, Figure 1)
Further guidance on Concrete and Fire from The Concrete Centre
This document provides information on the material and resource efficiency of concrete and masonry.
Gives likely structural options for a concrete frame, with useful points to note - written by engineers for engineers.
£55.00 + VAT
This publication assists engineers in understanding the common challenges of building tall.
This publication widens the understanding of post-tensioned floor construction and illustrates the considerable benefits.
This guide focuses on concrete and masonry housing, and presents requirements for Part L1A of the Building Regulations.
The buildings from 70 years of Concrete Quarterly.
£30.00 + VAT
This publication summarises the material used in the design of reinforced and prestressed concrete bridges using Eurocode 2
This guide focuses on the use of concrete at Coin Street Neighbourhood Centre and its part in creating a low energy building.
An all-you-need-to-know guide on the specification of sustainable concrete.
Guidance on how concrete can be used to achieve credits under the latest version of BREEAM NC:2014.
09:00 - 16:30
£175.00 + VAT