Eurocode 1, Actions on structures, contains within its 10 parts (see table below) all the information required by the designer to assess the individual actions on a structure. It is generally self-explanatory and the actions to be used in the UK (as advised in the UK NAs) are typically the same as those in the old British Standards (BS 6399: Loading for buildings and BS 648: Schedule of weights of building materials). The most notable exception is the bulk density of reinforced concrete, which was increased to 25 kN/m3.
|BS EN 1991-1-1
||Densities, self-weight and imposed loads
|BS EN 1991-1-2
||Actions on structures exposed to fire
|BS EN 1991-1-3
|BS EN 1991-1-4
|BS EN 1991-1-5
|BS EN 1991-1-6
||Actions during execution
|BS EN 1991-1-7
||Accidental actions due to impact and explosions
|BS EN 1991-2
||Traffic loads on bridges
|BS EN 1-3
||Actions induced by cranes and machinery
|BS EN 1-4
||Actions in silos and tanks
Extract from How to Design Structures using Eurocode 2 (page 5, table 8)
This publication seeks to provide information for structural engineers who are designing tall buildings in concrete.
A magazine to celebrate 10 years of the concrete industry sustainable construction strategy.
The buildings from 70 years of Concrete Quarterly.
Concrete's ability to provide passive cooling is widely applied in both new and refurbished buildings; this guide explains thermal mass and its advantages.
Gives likely structural options for a concrete frame, with useful points to note - written by engineers for engineers.
This document provides information on the material and resource efficiency of concrete and masonry.
An all-you-need-to-know guide on the specification of sustainable concrete.
This publication widens the understanding of post-tensioned floor construction and illustrates the considerable benefits.
£55.00 + VAT
This publication assists engineers in understanding the common challenges of building tall.