| Centrium,
Woking |
SRB/5326/A |
Wall |
2 x 12.5mm Knauf Soundshield plus extra 'sacrificial' layer for
sockets |
70mm Knauf Soundshield c-stud with 60mm cavity. Cavity
partially filled with Rocksil RS33 Insulation |
2x12.5mm Knauf Soundshield, plus extra "sacrificial" layer for
socket |
50>45
Pass |
|
| |
|
Floor |
-
|
175mm insitu concrete |
12.5mm Soundshield board 125mm C-form channel
|
52>45 Pass |
60 </=60 Pass |
| Colman House,
University of East Anglia |
040901 |
Wall |
2mm plaster skim |
180mm insitu concrete |
2mm plaster skim |
47>45 Pass |
|
| |
|
Floor |
50mm screed bonded 6mm carpet |
250mm insitu concrete |
painted |
57>45 pass |
39<62 pass |
|
|
U20 |
Wall |
-
|
180mm insitu concrete |
-
|
48>45 pass |
|
| |
|
Floor |
Bonded 5mm carpet |
225mm insitu concrete |
15mm polystyrene on aluminium exposed grids |
59>45 Pass |
42<62 Pass |
|
Manchester |
PO818-REPOI-IE |
Wall |
2 layers of 12.5mm plasterboard supported by channel system
with 70mm Isowool in cavity
|
150mm precast concrete |
12.5mm plasterboard on 38mm x 25mm battens |
51>45 Pass |
|
| |
|
Floor |
65mm screed on resilient layer |
200mm precast hollowcore concrete |
12.5mm plasterboard on channel support |
50>45 Pass |
|
|
Colwyn Bay |
PO818-REPO1-LC |
Wall |
12.5mm plasterboard on 48mm c-studs with 52mm
quilt |
2 leaves 100mm block (2000kg/m3), 40mm
cavity |
Single layer plasterboard on adhesive dabs |
51>45 Pass |
|
| |
|
Floor |
18mm chipboard
8mm resilient layer
30mm insulation panel |
100mm beam and block floor (2000kg/m3) with 75
screed |
15mm Plasterboard fixed via resilient bars on 50mm timber
battens. 50mm acoustic insulation fixed between
structural beams |
45 >/= 45
Pass |
55<62 Pass |
|
(nine different finishes)
|
C/03/5L/0804 |
Wall |
12.5mm plasterboard fixed on plaster dabs |
(Two leaves of 100mm dense blocks) |
12.5mm plasterboard fixed on plaster dabs |
Pass |
|
|
|
|
Floor |
Varying screeds and resilient layers |
150mm beam and block (300kg/m3) |
Varying suspended ceilings |
Pass |
Pass |
| Contemporis
Phase 2, Bristol |
REP-1001981-JNB-010306-1 |
Wall |
Render coat and plaster finish
13-15mm |
215mm dense block
(195kg/m3) |
Render coat and plaster finish
13-15 mm |
53>45 Pass |
|
| |
|
Floor |
Tiled finish with resilient backing |
250mm insitu slab |
Metal framing system, 15mm plasterboard with thirteen
downlighters
|
55>45
Pass
|
55>45
Pass
|
|
|
SW402.06
|
Wall |
25mm thick mineral wool and 12.5mm plasterboard with plaster
skim on
both sides. Mineral wool layer continues to mineral wool mat
laid on floor planks.
|
200mm thick Structherm Fastbuild solid concrete wall
panels.
|
|
62>45 Pass
|
|
| |
|
Floor |
Upper surface of separating floor has 75mm concrete screed
laid on 25mm thick mineral fibre mat(36kgm-3). Screed is isolated
from separating wall panel by the mineral wool layer. Underside of
separating floor has 100mm thick mineral fibre mat (10kgm-3)
above 15mm thick plasterboard with plaster skim.
|
200mm thick hollowcore concrete plank floor running
parallel
to separating wall and supported on separating wall
panel.
|
|
55>45 Pass
|
42<62 Pass
|
|
Llety Road, Tumble, Llanelli
|
REP-10-02038-AM-250406-1
|
Wall |
External Wall
215mm thickness Durox System 500
thin-joint blockwork (107kg/m2) finished internally with
plasterboard-on-dabs, and finished
externally with 60mm of expanded polystyrene combined with a
proprietary render.
Separating Wall
2 leaves of 100mm Durox System 600
thin-joint blocks (67 kg/m2) per leaf separated by a 75mm
cavity
and finished on both sides with an
8mm sand/cement parging coat (scratch finish) and 9.5mm
plasterboard on dabs.
|
|
|
|
|
| |
|
Floor |
Ground Floor
Beam and block suspended floor using
dense infill blocks finished with 65mm insulation and 18mm
moisture resistant chipboard.
First Floor
Timber joists on joist hangers
spanning onto the separating wall, finished with 22mm moisture
resistant
chipboard (floor) and plasterboard
(ceiling).
|
|
|
|
|