A procedure for carrying out the detailed design of beams is shown in Table 1. This assumes that the beam dimensions have previously been determined during conceptual design. Concept designs prepared assuming detailed design would be to BS 8110 may be continued through to detailed design using Eurocode 2. More detailed advice on determining design life, actions, material properties, methods of analysis, minimum concrete cover for durability and control of cracks widths can be found in How to Design Concrete Structures to Eurocode 2: Getting Started.
Table 1
Determine design life
NA to BS EN 1990 Table NA.2.1
Assess actions on the slab
BS EN 1991 (10 parts) and National Annexes
Determine which combinations of actions apply
NA to BS EN 1990 Tables NA.A1.1 and NA.A1.2 (B)
Determine loading arrangements
NA to BS EN 1992–1–1
Check cover requirements for appropriate fire resistance period
Approved Document B. BS EN 1992–1–2: Section 5
Calculate min. cover for durability, fire and bond requirements
BS EN 1992–1–1 Cl 4.4.1
Analyse structure to obtain critical moments and shear forces
BS EN 1992–1–1 section 5
Design flexural reinforcement
3: Slabs Figure 1
BS EN 1992–1–1 section 6.1
Check deflection
3: Slabs Figure 3
BS EN 1992–1–1 section 7.4
Check shear capacity
3: Slabs Table 7
BS EN 1992–1–1 section 6.2
Check spacing of bars
BS EN 1992–1–1 section 7.3
Gain access to all the free services available on this website
Register here
All Eurocode 2 resources