Concrete and NANDO

A list of the harmonised standards under the Construction Products Regulation (CPR) can be found on the European Commission website

Below is a list of the harmonised standards that relate to concrete.

Proprietary precast concrete products

EN 40-4:2005 - Lighting columns - Part 4: Requirements for reinforced and prestressed concrete lighting columns

EN 40-4:2005/AC:2006 - EN 40-4:2005/AC:2006 Lighting columns - Part 4: Requirements for reinforced and prestressed concrete lighting columns

EN 490:2004/A1:2006 - EN 490:2004/A1:2006 - Concrete roofing tiles and fittings for roof covering and wall cladding - Product specifications

EN 490: 2011 - EN 490:2011 Concrete roofing tiles and fittings for roof covering and wall cladding - Product specifications

EN 771-2:2011 - EN 771-2:2011 Specification for masonry units - Part 2: Calcium silicate masonry units

EN 771-3:2011 - EN 771-3:2011 Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and lightweight aggregates)

EN 771-4:2011 - EN 771-4:2011 Specification for masonry units - Part 4: Autoclaved aerated concrete masonry units

EN 1168:2005+A2:2009 - EN 1168:2005+A2:2009 Precast concrete products - Hollow core slabs

EN 1168:2005+A3:2011 - EN 1168:2005+A3:2011 Precast concrete products - Hollow core slabs

EN 1338:2003 - Concrete paving blocks - Requirements and test methods

EN 1338:2003/AC:2006 - EN 1338:2003/AC:2006 Concrete paving blocks - Requirements and test methods

EN 1339:2003 - Concrete paving flags - Requirements and test methods

EN 1339:2003/AC:2006 - EN 1339:2003/AC:2006 Concrete paving flags - Requirements and test methods

EN 1340:2003 - Concrete kerb units - Requirements and test methods

EN 1340:2003/AC:2006 - EN 1340:2003/AC:2006 Concrete kerb units - Requirements and test methods

EN 1520:2011 - EN 1520:2011 Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement

EN 1857:2010 - EN 1857:2010 Chimneys - Components - Concrete flue liners

EN 1858:2008+A1:2011 - EN 1858:2008+A1:2011 Chimneys - Components -Concrete flue blocks

EN 1916:2002 - Concrete pipes and fittings, unreinforced, steel fibre and reinforced

EN 1916:2002/AC:2008 - EN 1916:2002/AC:2008 - Concrete pipes and fittings,unreinforced, steel fibre and reinforced

EN 1917:2002 - Concrete manholes and inspection chambers, unreinforced, steel fibre and reinforced

EN 1917:2002/AC:2008 - EN 1917:2002/AC:2008 - Concrete manholes and inspection chambers, unreinforced, steel fibre and reinforced

EN 12446:2011 - EN 12446:2011 Chimneys - Components - Concrete outer wall elements

EN 12737:2004+A1:2007 - Precast concrete products - Floor slats for livestock

EN 12794:2005+A1:2007 - EN 12794:2005+A1:2007 - Precast concrete products - Foundation piles

EN 12794:2005+A1:2007/AC:2008 - EN 12794:2005+A1:2007/AC:2008 Precast concrete products - Foundation piles

EN 12839:2001 - Precast concrete products - Elements for fences

EN 12839:2012 - EN 12839:2012 Precast concrete products - Elements for fences

EN 12843:2004 - Precast concrete products - Masts and poles

EN 13224:2004+A1:2007 - EN 13224:2004+A1:2007- Precast concrete products - Ribbed floor elements

EN 13224:2011 - EN 13224:2011 Precast concrete products - Ribbed floor elements

EN 13225:2004 - Precast concrete products - Linear structural elements

EN 13225:2004/AC:2006 - EN 13225:2004/AC:2006 Precast concrete products - Linear structural elements

EN 13693:2004+A1:2009 - EN 13693:2004+A1:2009 Precast concrete products - Special roof elements

EN 13747:2005+A2:2010 - Precast concrete products - Floor plates for floor systems

EN 13877-3:2004 - Concrete pavements - Part 3: Specifications for dowels to be used in concrete pavements

EN 13978-1:2005 - Precast concrete products - Precast concrete garages - Part 1: Requirements for reinforced garages monolithic or consisting of single sections with room dimensions

EN 14843:2007 - EN 14843:2007 - Precast concrete products - Stairs

EN 14844:2006+A1:2008 - EN 14844:2006+A1:2008 Precast concrete products - Box culverts

EN 14844:2006+A2:2011 - EN 14844:2006+A2:2011 Precast concrete products - Box culverts

EN 14991:2007 - Precast concrete products - Foundation elements

EN 14992:2007 - Precast concrete products - Wall elements

EN 14992:2007+A1:2012 - EN 14992:2007+A1:2012 Precast concrete products - Wall elements

EN 15037-1:2008 - Precast concrete products - Beam-and-block floor systems -Part 1: Beams

EN 15037-2:2009+A1:2011 - Precast concrete products - Beam-and-block floor systems - Part 2: Concrete blocks

EN 15037-3:2009+A1:2011 - Precast concrete products - Beam-and-block floor systems - Part 3: Clay blocks

EN 15037-4:2010 - Precast concrete products - Beam-and-block floor systems - Part 4: Expanded polystyrene blocks

EN 15050:2007+A1:2012 - EN 15050:2007+A1:2012 Precast concrete products - Bridge elements

EN 15258:2008 - Precast concrete products - Retaining wall elements

EN 15435:2008 - Precast concrete products - Normal weight and lightweight concrete shuttering blocks - Product properties and performance

EN 15498:2008 - Precast concrete products - Wood-chip concrete shuttering blocks - Product properties and performance

 

 

Components of concrete

EN 197-1:2000 - Cement - Part 1: Composition, specifications and conformity criteria for common cements

EN 197-1:2000/ A1:2004 - Cement - Part 1: Composition, specifications and conformity criteria for common cements

EN 197-1:2000/A3:2007 - EN 197-1:2000/A3:2007

EN 197-1:2011 - EN 197-1:2011 Cement - Part 1: Composition, specifications and conformity criteria for common cements

EN 197-4:2004 - Cement - Part 4: Composition, specifications and conformity criteria for low early strength blastfurnace cements

EN 450-1:2005+A1:2007 - Fly ash for concrete - Part 1: Definition, specifications and conformity criteria

EN 450-1:2012 - EN 450-1:2012 Fly ash for concrete - Part 1: Definition, specifications and conformity criteria

EN 934-2:2009 - EN 934-2:2009 Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling

EN 934-2:2009+A1:2012 - EN 934-2:2009+A1:2012 Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling

EN 934-3:2009 - EN 934-3:2009 Admixtures for concrete, mortar and grout - Part 3: Admixtures for masonry mortar - Definitions, requirements, conformity, marking and labelling

 

EN 934-3:2009+A1:2012 - EN 934-3:2009+A1:2012 Admixtures for concrete, mortar and grout - Part 3: Admixtures for masonry mortar - Definitions, requirements, conformity and marking and labelling

EN 934-4:2009 - EN 934-4:2009 Admixtures for concrete, mortar and grout - Part 4: Admixtures for grout for prestressing tendons - Definitions, requirements, conformity, marking and labelling

EN 934-5:2007 - Admixtures for concrete, mortar and grout - Part 5: Admixtures for sprayed concrete - Definitions, requirements, conformity, marking and labelling

EN 1504-2:2004 - Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete

EN 1504-3:2005 - Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 3: Structural and non-structural repair

EN 1504-4:2004 - Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 4: Structural bonding

EN 1504-5:2004 - Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 5: Concrete injection

EN 1504-6:2006 - Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 6: Anchoring of reinforcing steel bar

EN 1504-7:2006 - Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 7: Reinforcement corrosion protection

EN 12620:2002+A1:2008 - Aggregates for concrete

EN 12878:2005 -   Pigments for the colouring of building materials based on cement and/or lime - Specifications and methods of test

EN 12878:2005/AC:2006 - EN 12878:2005/AC:2006 Pigments for the colouring of building materials based on cement and/or lime - Specifications and methods of test

EN 13055-1:2002 - Lightweight aggregates - Part 1: Lightweight aggregates for concrete, mortar and grout

EN 13055-1:2002/AC:2004 - EN 13055-1:2002/AC:2004 Lightweight aggregates - Part 1: Lightweight aggregates for concrete, mortar and grout

EN 13263-1:2005+A1:2009 - EN 13263-1:2005+A1:2009 Silica fume for concrete - Part 1: Definitions, requirements and conformity criteria

EN 13813:2002 -    Screed material and floor screeds - Screed materials - Properties and requirements

EN 14016-1:2004 - Binders for magnesite screeds - Caustic magnesia and magnesium chloride - Part 1: Definitions, requirements

EN 14889-1:2006 - Fibres for concrete - Part 1: Steel fibres - Definitions, specifications and conformity

EN 14889-2:2006 - Fibres for concrete - Part 2: Polymer fibres - Definitions, specifications and conformity

EN 15167-1:2006 - Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 1: Definitions, specifications and conformity criteria