European standards for precast concrete

Precast Concrete: EN 13369 and Precast Products

*based on Dipl-Ing Dieter Schwerm, Bad Honnef, Building with structural precast components: practical implementation, Betonwerk+Fertigeil-Technik BFT 3/2005. www.bft-online.info/en)

Precast product standards    

With the exception of EN 13369, all structural precast product standards are mandated. However the product standards all refer to EN 13369: Common rules for precast concrete products. And thanks to EN 13369, the product standards are all structured in the same way.

The product standards (see table) are written 'by exception' to EN 13369 i.e. they either accept what is in EN 13369 or have mirror clauses that elucidate or supersede those in EN 13369. 

This approach was chosen in order to ensure that:

  • The product standards are all based on a uniform approach. 
  • Conflicting statements were avoided a possibility that could not be entirely ruled out in the early phase of the standardisation work. Having been established in EN 13369, the higher-ranking provisions in the various product standards, should not differ from each other. 

 
As an example, in regard to 'mechanical resistance' EN 13369 Cl 4.3.3 says to either design to EN 1992, use design based on EN 1992 aided by physical testing or test. BS EN 1168 hollow core slabs Cl 4.3.3.2 goes into some depth concerning design but says nothing about 'verification' based on EN 1992 aided by physical testing or testing.

Published BS EN standards for precast concrete

Standard

Title

BS EN 1168:2005

Hollow core slabs

BS EN 12794:2005

Foundation piles

BS EN 12843:2004

Masts and poles

BS EN 12839:2012

Elements for fences

BS EN 13224:2011

Ribbed floor elements

BS EN 13225:2013

Linear structural elements

BS EN 13369:2004

Common rules for precast concrete products

BS EN 13693:2004

Special roof elements

BS EN 13747:2005

Floor plates for floor systems

BS EN 13978-1:2005

Precast concrete garages

BS EN 14389-1:2015

Road traffic noise reducing devices and barriers

BS EN 14843:2007

Stairs

BS EN 14844:2006

Box culverts

BS EN 14991:2007

Foundation elements

BS EN 14992:2007

Wall elements

BS EN 15037 (parts 1 – 5)

Beam and block floor systems

BS EN 15050:2007

Bridge elements

BS EN 15258:2008

Retaining wall elements

Structure of the product standards

The most important chapters refer to:

  • the areas of application 
  • the requirements made on: materials, manufacture and end product in particular, manufacturing tolerances, minimum dimensions, concrete cover, surface quality and the resistance to mechanical actions, ie the load-bearing capacity.  

Other clauses deal with:

  • fire resistance, 
  • behaviour in fire, 
  • sound insulation, 
  • durability, 
  • safety in transport and during erection and 
  • safety in use.  

One chapter is devoted to:

  • test procedures, 
  • conformity assessment, 
  • labelling and 
  • technical documentation. 

For most clauses, reference is simply made to EN 13369.  In other cases, the product standard defines appropriate rules, depending on the product characteristics. This is followed by normative and informative annexes, which also depend on the individual product