Horizontal panel system
Innovation in formwork has led to small lightweight modular systems that provide versatile formwork solutions on-site. Use of aluminium, high tensile steel, fibre glass or special plastics for different components has enabled lightweight units to be developed which can be safely manhandled to achieve a practical formwork system. The components of the lightweight formwork systems are engineered to give robust and easy-to-handle solutions capable of dealing with both regular and irregular formwork areas. Minimising the number of different components in a formwork system allows mobility and quick installation of the formwork. The individual components often have multiple uses.
A range of lightweight modular formwork systems is available for the construction of most types of structure. They are suitable for any type of concrete frame construction. Lightweight formwork systems used for slab construction generally consist of a series of interconnected falsework bays, independent props or system scaffolds and supporting a number of panels.
- Lightweight components enable larger areas of formwork to be assembled.
- Increased speed of construction.
- Lightweight components and the highly engineering connection methods reduce the workforce requirement and increase onsite assembly.
- The simplicity of assembly and disassembly of these modular systems reduces the requirement for skilled labour.
- Basic assembly is possible with minimal crane use as components can be manually handled.
- Total load requiring back propping is minimised due to reduced weight of formwork system.
- The engineered individual components of the formwork systems enable precise adjustment to the formwork.
- Good quality surface finishes possible when appropriate site controls are used.
- The systems can be used on sites with space and access limitations.
- Erection can be carried out from below, largely eliminating working from height.
- These systems have limited in-built standard health and safety features.
- These systems provide a fairly robust assembly, which creates a stable working platform.
- Site operatives can quickly become familiar with the health and safety procedures due to the simplicity and repetitive nature of the assembly process.
- These modular lightweight systems can be combined with wind-shield systems for a slab-edge protection.
- The support slab must be capable of carrying loads at bearing locations; back propping may be needed underneath the slab.
- Safe access has to be provided
This publication assists engineers in understanding the common challenges of building tall.
An all-you-need-to-know guide on the specification of sustainable concrete.
Guidance on how concrete can be used to achieve credits under the latest version of BREEAM NC:2014.
This guide focuses on concrete and masonry housing, and presents requirements for Part L1A of the Building Regulations.
Gives likely structural options for a concrete frame, with useful points to note - written by engineers for engineers.
This document provides information on the material and resource efficiency of concrete and masonry.
This guide sets out how concrete's attributes can be used to minimise CO2 emissions.
This eighth annual report report presents the concrete industry’s sustainability performance in 2014.
This guide focuses on the use of concrete at Coin Street Neighbourhood Centre and its part in creating a low energy building.
This publication summarises the material used in the design of reinforced and prestressed concrete bridges using Eurocode 2
17:45 - 20:30
£275.00 + VAT